|
|
News
| Tail Rotor Hub V1 |
In order to modify the Version 1 of the Tail Rotor Hub, you need the following components:
- 2 pcs Angular Bearings (cod. 8602600A)
- 1 pcs Set screw M3x4
- 2 pcs Socket screw M3x8 (12.9 grade)
- 2 pcs Washers
These items should be assembled according to this scheme:
|
| Tail Rotor Hub V2 |
In order to modify the Version 2 of the Tail Rotor HUB you need to substitute the Thrust Bearings with the Angular Bearings (cod. 8602600A/EQ10370).
The items should be assembled according to the scheme.
|
| Tail Rotor Hub V2.01 |
This is the Version 2.01 of the Tail Rotor Hub : it is made up by the spare parts EQ10371 (Tail Rotor HUB) and EQ10370 (Angular Bearings).
You should assembly according to the present scheme.
|
| ATTENTION!!! |
Pay special attention to Angular Bearing inserting direction during the assembling process.
Make sure side marked with black colour is oriented towards tail blades.
Should you invert inserting direction this will lead to the whole structure break.
|
|
